1 / 7
Talaria Komodo short rear fender / number plate / brake light holder — image 1
1 / 7

Talaria Komodo short rear fender / number plate / brake light holder

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Holder for shortening the rear fender. As the original didn't look well in my eyes I created a printable holder for…

Rating
0 / 5
Likes
0
Downloads
6
Makes
0
Views
136
Reviews
0

Updated at source:

Model information

Category
Other Ideas
License
Creative Commons — Attribution — Share Alike

Holder for shortening the rear fender. As the original didn't look well in my eyes I created a printable holder for the original backlight and number plate illumination. For this solution you have to cut the aluminium fender holder by 115mm and tap three new threads to fix the original plate holder through the printed part. The three screws should be secured with liquid screw lock due to the vibrations. You have dismount the aluminium holder and mark the new threads through installed printed part.

Mine has now 250 kilometers in rough conditions and no signs of disintegration, so the solution should work fine.

The turn lights are from aliexpress, search for 8mm Mini Motorcycle LED Turn Signal Light, I have ordered by this link: https://aliexpress.com/item/1005007353943535.html

If you choose to use this small turn lights on the front, you need some small inserts for the front mask as the original lights are with 10 mm Thread. These small washers are also included as STL and only needed for this 8 mm aliexpress turn lights.

Printed with ABS and minimum 35 percent 3d honeycomb infill

Category: Other

Tags