Advanced Filtration Adapter for alternative exhaust setups

I have basically 3 possible setups I wanted to incorporate into my machine:

• Printing without any exhaust or filtration (the default for any Core One machine)

• Printing with the (Alternative) Advanced Filtration unit

• Printing with an exhaust tube that goes out the window

Seeing I didn't always wanted to unbolt/bolt the Alternative Advanced Filtration or Exhaust, and the Alternative Filtration has different dimensions than the original Prusa Advanced Filtration, I heavily remixed this excellent model: https://www.printables.com/model/1335288-prusa-core-one-advanced-filtration-adapter

and ofcourse the Alternative Advanced Filtration itself (for reference):

https://www.printables.com/model/1312457-alternative-advanced-filtration-for-prusa-core-one

My remix is found here:

lastly, also the exhaust option I was using (for reference):

https://www.printables.com/model/1732918-core-one-l-exhaust-flap-to-100mm-vent-tube

My remix is found here:

Now they all slide in/out the filtration adapter. I also wanted to put whatever option I was not using in "standby" on the back of my machine.
(especially the Advanced Filtration unit, seeing it is wired to the machine)

So I also made a semi-new version of the standby's provided in the Advanced Filtration Adapter.

Note: this standby has a "support" that rests on the case, but has only been tested on a Core One L (not sure if it will fit the regular Core One, but this can be easily adressed)

For this last model I uploaded (the standby) I provided both the "solid" model as the "cut up" model which I found was much easier to print. Just needs some assembly afterwards.

Note2: you will still need the inner adapter provided with the original Advanced Filtration Adapter model, OR if you use a Core One L, the adapted version which you can find here: https://www.printables.com/model/1514012-prusa-core-one-l-advanced-filtration-adapter
Seeing I didn't have to remix them, I did not upload them here.

Other than that, follow the instructions of the original Advanced Filtration Adapter model for assembly.

P.S. As you can read I remixed 3 models, but Printables didn't allow me to upload/reference them in one publish license-wise even though all original models have Remix Culture allowed, so I split them up.