Sturdy Ikea Metod Leg (9cm - 15cm height adjustable)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Height adjustable furniture feet (roughly 9cm - 15cm) for kitchen cabinets with ikea Metod hole pattern.
- Rating
- 0 / 5
- Likes
- 30
- Downloads
- 75
- Makes
- 0
- Views
- 447
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial
The original ikea legs for the IKEA Metod kitchen cabinets seemed too flimsy and expensive to me, so i designed these as a 3d printable replacement. Has successfully been holding up my entire kitchen for three months now.
One height adjustable leg needs the following parts:
1x Flange
1x Screw Leg
4x Pin
Printed using PLA with 6 wall loops, 45% gyroid infill and scarf seams. I used a 3mm brim on my open bedslinger printer to prevent deattachement.
Print and test fit a singe assembly first to determine if you need to shrink the screw-leg in x-y directions by a small amount to achieve a good fit. Do not shrink in z! Default sizes work perfectly on my a1 mini and x2d.
FreeCAD files available for adjustments.