1 / 5
IKEA Bissa shoe cabinet - swivel for longer bolts — image 1
1 / 5

IKEA Bissa shoe cabinet - swivel for longer bolts

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Replacement swivel for IKEA Bissa shoe cabinet. Designed for use with hex or square bolts, in case wood gets stripped.

Rating
0 / 5
Likes
2
Downloads
3
Makes
0
Views
29
Reviews
0

Updated at source:

Model information

Category
Living Room
License
Creative Commons — Attribution — Noncommercial — Share Alike

Purpose

This part is a new remake of teh IKEA BISSA shoe cabinet's plastic swivels. The cabinet's doors each pivot around these, which are then screwed into the particleboard wooden side panels. The 2 existing models I've listed as "remix" didn't work for me because one had a hex head making contact with wood (didn't match my part), and the other had unneeded complex geometry rounding off the side facing the printer bed.

My design is unique because instead of a round screw head fitting the hole, I've re-cut it to fit either a square bolt head, or an M6 hex head. 

Because the wood in my cabinet was stripped, I had to drill through the particleboard, run the bolt through, and screw in a nut on the outside for a better fit. These square or hex heads just happen to match the nut/bolt pairs I already had on hand, and could be resized to match other standard sizes. 

Usage & Printing

If like me your cabinet won't hold the original screw anymore it's because the wood has become stripped out. I removed the screw and the drawer and used a 5/32" drill bit to drill a hole through the particleboard. Then, replace the cabinet, put in this replacement part and push the bolt through everything. 

Bolt should seat inside the hole of this new part and come out the other side, where you can attach a nut. Tighten to your preference, this will adjust how loosely the drawer opens. 

To print,  orient the wide flat head of the part face-down on your print bed in the slicer. I used 80% gyroid infill with 3 walls and 0.25 layer height.

Options

I sized these based on whatever combination of nut/bolt I had in my collection of odd screws.

  • One square headed bolt (matches a bolt and washer/nut I already had)

  • One M6 hex nut head

  • An alternate of both above, but with an optional hex head in case you need to grip for tightening (I didn't use this but thought it might be handy)

If you have a specific bolt set with head sizes that don't fit what I've built here, you can use Tinkercad to copy and modify your own design. I've broken out and labeled all components so things are self-explanatory.

https://www.tinkercad.com/things/5mYQ0si90nQ-ikea-bissa-swivels?sharecode=VuWwA8Lt-fAq8J_1GE5-15UGLfn1acTjHwrnaD-xp6k

Tags