1 / 15
Lego Duplo 2x2 30 deg angled brick (so you can make a full circle) — image 1
1 / 15

Lego Duplo 2x2 30 deg angled brick (so you can make a full circle)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

You know what I love about Lego? That only your imagination limits you.

Rating
0 / 5
Likes
21
Downloads
103
Makes
0
Views
1,059
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution

You know what I love about Lego? That only your imagination limits you. Every time i play with Lego I am excited and inspired to find new ways of connecting them. There are so many ways you can build great stuff with them. This is really amazing.
But why not take it one step further?
I've always wanted to make w full circle with legos. So I've decide to design special 30 degrees 2x2 brick and make it possible.

There are 5 STLs to choose from:

  • LegoDuplo2x230degFlatOnBottomWith0.12Support
  • LegoDuplo2x230degFlatOnBottomWith0.20Support
    are oriented flat on the bottom, with support for the central bottom pin. There are 0.12 and 0.20 mm gap between the support and the pin.
  • LegoDuplo2x230degFlatTopWith0.12Support
  • LegoDuplo2x230degFlatTopWith0.20Support
    are oriented so the top of the brick is flat, that means there are support for the pin and the brick itself, so the top part prints parallel to the hotbed.
  • LegoDuplo2x230degNoSupport
    There are no support at all so you can generate them on your own.
    Also there is source file from DesignSparkMechanical(LegoDuplo.rsdoc) so you can modify the object on your own.

    To make a full circle you need 12 pieces. But before printing 12 of them print just one and check if it is ok. Have fun.

    Warning: 3D printed parts are not safe for toddlers. Use your common sense.

    After printing gently remove the supports.

    Here is my video about this part

Print instructions

Category: Toy & Game Accessories Print Settings

Printer: Anet A6 Prusified

Rafts: Doesn't Matter

Supports: No

Resolution: 0,2

Infill: 30%

Filament: Fiberlogy PLA Yellow, Green
Notes:

You don't need supports unless you are printing LegoDuplo2x230degNoSupport.stl.
I've printed it with PLA and PETG with good results.
Please print single one at first to check if it fits your legos.

My youtube video

Video about this design on my youtube

Tags