1 / 6
Verizon FiOS I-211M-L ONT + Power Brick — 19" Rack Mount (1U, two-piece) — image 1
1 / 6

Verizon FiOS I-211M-L ONT + Power Brick — 19" Rack Mount (1U, two-piece)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Two-piece 1U rack mount for the Verizon FiOS I-211M-L ONT and its power brick — LED window, keystone, tool-free fit.

Rating
0 / 5
Likes
1
Downloads
19
Makes
0
Views
85
Reviews
0

Updated at source:

Model information

Category
Electronics
License
Creative Commons — Attribution

Moves the Verizon FiOS I-211M-L ONT and its "Power OK" power brick out of the wall box and into a 19" rack: a two-piece 1U mount with a status-LED window, keystone passthrough for the ethernet handoff, and tool-free friction retention that hugs the devices' chamfered edges — no straps, no screws touching the devices.

Two modules that bolt together into one 19" × 1U face:

  • Right piece — ONT cage. Hex-vented shelf, side eaves and a front brow whose 45° undersides ride the ONT's chamfered edges: slide it in from the rear and it self-centers with a light friction grip. The ONT rides on its own rubber feet (solid landing pads in the vent field). Status LEDs show through a front window; the fiber exits through a gap in the outer wall with gentle bend radius; all copper dresses off the open rear.

  • Left piece — power brick cage. The brick slides in tab-first; its own wall-box mounting tab locks under a hold-down bar, eaves grab the top chamfer, both cords exit the open rear. Keystone slot in the front face for the ethernet handoff.

  • Pieces join with two M5 screws into captive hex nuts; each ear takes standard M6 cage-nut hardware with widened slots for alignment play.

1U height note: the brick is 44 mm tall — this mount lets it dip a few mm into the rack unit BELOW the panel, so that U must be empty (or use the included 2U left piece, which keeps everything inside its own footprint — it pairs with the same right piece unchanged).

Printed in ASA and living in my rack (photos). OpenSCAD source, full device measurements, and the design/build log on GitHub.

Designed in collaboration with Claude (Fable 5) — co-authored per the repo's git history.

source at github.com/zackgomez/i211ml-rack-mount

Fan-made mount; not affiliated with Verizon. The ONT remains your ISP's property — relocate gently, mind the fiber bend radius, and keep the dust caps on anything you unplug.

Tags