2020/2040/4040 Blind Joint Drill Jig with 625 bearings
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A jig to help drill 5 mm holes for blind joints in 2020, 2040, and 4040 aluminum extrusions using 625 bearings
- Rating
- 0 / 5
- Likes
- 13
- Downloads
- 55
- Makes
- 0
- Views
- 290
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a jig to help drill blind joint holes in aluminum extrusions using a handheld power drill. You probably won't be winning any awards for the cleanest drilling, but it should work fine.
BOM
8x M3x6 BHCS
4x 625 bearings (you can harvest these from Ender-3 POM wheels)
2x M5x10 BHCS
2x M5 t-nuts
5mm drill bits (buy multiple in case you break them)
Tips
Please wear safety glasses!
If you are drilling 4040 extrusions, you will probably get better results if you drill one side at a time (rather than trying to drill all the way through)
If you are using M6 bolts in your blind joints (like "EU profile" and similar which have M6 tapped holes), the hex wrench may have a very tight fit through these 5mm holes especially if they are not perfectly aligned. You may need to ream the holes with a 5.5 mm or 7/32" drill bit.
Going slowly and gently while spinning the drill at the highest possible speed worked best for me