Simple Stand for Fortnite Sprites
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.15 – €0.19 net (excluding VAT)
For file: Sprite Base Small_0.2mm_PLA_M5C.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.17 excluding VAT (range midpoint).
- Weight reported by the author
- 3 g
- Print time reported by the author
- 7.8 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
This is a simple make that allows you to stand up the Fortnite Sprites that are printed from Paulittka Remenarova's make
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 68
- Makes
- 0
- Views
- 420
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Characters & Monsters
- License
- Creative Commons — Public Domain
I've printed loads of Fortnite sprites for the grand kids but they were all lacking a stand, so I made this one. Very easy about 8 minutes to print in PLA no supports. There are 2 slightly differs sizes one has 22mm separated holes and the other is 20mm as some sprites are slightly smaller leg spans. Top Tip, if you don't wish to permanently attach the Sprite to the base for whatever reason, a small ball of White Tak (same as Blu Tak but white) works perfectly