Jeep Renegade Rear Window Pin Length Extenders
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A simple and practical 3D-printed extension designed to increase the length of the pins that support and secure the rear
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 7
- Makes
- 0
- Views
- 60
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Public Domain
A simple and practical 3D-printed extension designed to increase the length of the pins that support and secure the rear window panel of the Jeep Renegade.
These extenders are useful when the original pins are too short or when additional length is required to achieve a better fit and more secure positioning of the rear window panel.
🛠 Features
Designed specifically for the rear window panel support pins
Increases the effective pin length
Easy to print and install
No special supports required
Designed as a simple replacement/extension part
Lightweight but strong enough for normal use
🖨 Recommended Print Settings
Material: PETG
Nozzle: 0.4 mm
Layer height: 0.20 mm
Perimeters: 3
Infill: 30%
Top/Bottom layers: 4–5
Supports: Not required
Print speed: Standard PETG settings
PETG is recommended because it provides a good combination of strength, durability and resistance to temperature variations, making it more suitable than PLA for automotive applications.
⚠ Installation
Before installation, check the fit and make sure the extender is properly seated on the original pin. Test the movement and alignment of the rear window panel before regular use.
This is a 3D-printed aftermarket accessory and is not an original Jeep/Mopar replacement part. Use at your own discretion and verify compatibility with your specific Jeep Renegade model and rear window configuration.