1 / 2
Flashforge Creator 5 Waste Bin with wiper
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Remix Flashforge Creator 5 Waste Bin with wiper.
- Rating
- 0 / 5
- Likes
- 17
- Downloads
- 75
- Makes
- 0
- Views
- 448
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Remix of creator5 waste bin with wiper (I cannot find the link). I've changed holes for 6x2mm magnet because they are cheaper on aliexpress and Bambu Lab A1 wiper which I have few around secured with super glue.
I've added extra gcode to let the wiper run over the wiper.
Add the below gcode to Machine Start G-code in Flash Studio. (Don't do it if you are not familiar with G-code editing.)
After line M109 S[nozzle_temperature_initial_layer] T[initial_extruder]
G1 X260 Y258 Z3.8 F6000
G1 X260 Y240 Z3.8 F2400
G1 X260 Y258 Z3.8 F2400
G1 X260 Y240 Z3.8 F2400
G1 X260 Y258 Z3.8 F2400
G1 X260 Y240 Z3.8 F2400
G1 X260 Y258 Z3.8 F2400
G1 X260 Y240 Z3.8 F2400
G1 X260 Y258 Z3.8 F2400
G1 X250 Y258 Z3.8 F2400