EP-P2900 Charging Stand Adapter Ring - Z Fold 8
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A ring adapter for using the EP-P2900 charger with The Printing Pilot Z Fold 8 Stand
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 23
- Makes
- 0
- Views
- 177
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Portable Devices
- License
- Creative Commons — Attribution
This model is just for the RING not the stand. It is an adapter for use of the EP-P2900 Samsung Magsafe/QI2 charger with The Printing Pilot's Fold 8 charging dock stand for the regular (wide) Z Fold 8 here or the taller Fold 8 Ultra here
If you are like me and bought the Samsung Magsafe / QI2 charger puck EP-P2900 with your Fold 8 and you want to use The Printing Pilot Charging stand to charge your phone in the open position then you need an adapter.
This ring should allow the use of the Samsung puck with the Fold 8 stand that is made for a slightly bigger Anker charging puck.
To install pull your charging puck through the hole in the stand from the back so it is just a little in front of the hole with the cable at the bottom through the hole. Put this adapter ring in the stand behind the charger and push into place with the cut out at the bottom over the cord. Then push the charging puck into the adapter ring. It should be tight but not break anything. Try not to pinch the cord too much.
I used regular PLA with default PrusaSlicer settings. No supports needed.
Note: I have not tried this on the Ultra stand but it should work. Let me know if it doesn't. It works great on the shorter Fold 8 stand.