1 / 4
Glass Carboy Bung Retainer Clamp
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Holds a standard #6 bung in place on my 1-gallon glass carboys.
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 9
- Makes
- 0
- Views
- 50
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution
Designed for retaining a standard #6 rubber stopper onto a 1-gallon glass carboy.
Carboy used:
Mouth: ID=28mm, OD=35mm
Rib: height=5mm, OD=40mm
Two 'inner' parts are threaded and not interchangeable. They surround the lower 'rib' of the carboy and support it from underneath. The outer 'ring' screws onto the inner parts which locks them together around the rib. Continuing to screw down the ring compresses/clamps the rubber stopper into the carboy.
Printed in cheap PETG on QIDI Q2 with 0.4mm nozzle. No supports. No brim.