Eclips3D Corner bracket cover
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Dress up your Eclips3D with these corner covers. Hides the end of the extrusions and the corner bracket and gives a…
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 10
- Makes
- 0
- Views
- 159
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
Dress up your Eclips3D with these corner covers. Hides the end of the extrusions and the corner bracket and gives a more finished look. Extrusions are Misumi 2020 and using the Misumi corner bracket (HBLFSN5-C) with the threaded screw holes.
Use a single M5 flathead screw to hold the cover secure in place.(available at Home Depot)
Print Settings
Printer:
Eclips3D
Rafts:
No
Supports:
No
Resolution:
0.24mm
Infill:
40%
Notes:
Print 2 of each bracket. One will fit the Back Left and Front Right, the other will fit the other two corners.
Category: 3D Printer Parts