Rainwater Collector Insert for 63 mm downpipes
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
An insert into rainwater collector for 63 mm downpipes to filter out leaves
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 5
- Makes
- 0
- Views
- 73
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Noncommercial
I needed a leaves' (and other debris) filter for a rain collector that would prevent clogging up the output of the raincollector.
I took an inspiration from Rainwater collector insert by @GcodeGearHead that when scaled down provided too small debris exit hole. In the end I decided to model the filter myself instead of remixing the existing model.
The inner diameter of the water collector is 63,5 mm and the output hole is 30 mm. The model's diameters on the input and output side match these to provide good fit and firm attachment in the pipe.
Designed for BRYZA 63 mm rainwater collector/reclaimer.
Print parameters:
Printer Prusa Mini+
Material Prusament PETG
0,15 mm layer height
No supports needed