Samsung smart TV weighted BN59 remote stand
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Samsung smart TV BN59 solar remote stand with cavity to add ballast for better stability
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 38
- Makes
- 0
- Views
- 129
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Living Room
- License
- Creative Commons — Attribution — Share Alike
Simple desktop stand for the Samsung solarcell remote shipped with most newer Samsung smart TVs.
Two versions available, one with a cavity on the bottom to add ballast increasing the stability and one with a flat bottom intended to be used with double sided tape.
Print instructions:
- Print from PLA or PETG using 0.2 mm layer height, standing upright, 0.4 mm nozzle recommended
- Use regular supports for the weighted stand, no supports needed for the flat bottom variant
Post-processing for the weighted variant:
Add washers, nuts or any spare screws in the cavity and pot it with epoxy. Once the epoxy cured silicone feet can be added to prevent the stand from sliding around.