Solder and probing helper for circular (industrial) connectors
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Eases cable soldering onto circular connectors and testing the connections
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 3
- Makes
- 0
- Views
- 44
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution
Ever meddled with circular connectors? Solder, crimping and probing while big cables attached and you try holding all at once? This helper eases that.
Wire the cables, then turn all around and re-clamp for probing. No need to detach the connector. Mount it in a vice or add magnets, bolts etc for hold on site. Usable with already soldered cables (but nothing helps if you forget to slide the cap over the cable before soldering ;-) ).
Made for Amphenol Socapex (SL BM 319 L), adapt to your own (.step files provided).
2 part design for easy 3D printing
4 bolts M3 x 35 and 4 nuts M3 needed. 2 mounts holder parts together and 2 clamps the connector from the top.
Connector here: https://www.ebay.de/itm/137844047696