Nerf Jolt Priming Handle
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Priming Handle for the Nerf Jolt (Requires TWO M3x20)
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 4
- Makes
- 0
- Views
- 90
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Toys & Games
- License
- Standard Digital File License
Ever had trouble priming your Nerf Jolt, well I certainly did (especially with a Modded Spring).
I created this model, the Nerf Jolt Priming Handle to make priming the blaster even easier!
Parts and Print Settings:
Requires TWO M3x20 Screws/Bolts
-Textured PEI Plate
-Supports ENABLED
-Slow down by height RECOMMENDED
-Wall Generation: Arachne
-Nozzle: 0.4mm
-Line Width: 0.4mm
-Wall Loops: 6
-Gyroid Infill 40%
-JoltHandleConnectorR and JoltHandleConnector:
-Brim Width: 15-20 mm
-JoltHandlePrimer:
-Brim Width: 2-5 mm
I printed this in PLA and tested it with a 5kg Modded Spring.
The other accessory on my Nerf Jolt is the Nerf Jolt Pistol Slide Pro, a remix I made.
Have a Bambu Printer? Check out the MakerWorld profile here:
https://makerworld.com/en/models/3168909-nerf-jolt-priming-handle#profileId-3582423