Ceiling Mounted Prusa PCCF Pulley with 608 Ball Bearing
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Two ready made options: 1) M5 Hex Head Cap Screws 2) 10mm screw. Or remix your own with the “blank”
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 9
- Makes
- 0
- Views
- 82
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
First, please read the description of the original, here: https://www.printables.com/model/1804980-pccf-prusa-pulley-with-608-ball-bearing
Download and print from the above: Wheel, Shaft, and Sleeve. Add your 608 bearing and complete the first 4 assembly steps.
For this Ceiling Mount model, I’m using M5 cap head screws into a T-nut on aluminum extruded frame. It requires 2 screws.
There is also a version with a through hole for 10mm screw.
OR, you can use the Blank model and remix your own!
I hope you enjoy the model! Comments📝, likes❤, ratings🤩 encouraged!