1 / 1
universal insert for misumi slides FTC robots
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
this insert works on both sides so you don't need to print different ones for each side
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 3
- Makes
- 0
- Views
- 53
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — NoDerivatives
Ready to assemble your slides? Here is a pre-exported insert design to get you up and running quickly, complete with the hardware list and print specs.
BOM (per insert):
1x M4 goBILDA screw
1x M4 standard hex nut
1x goBILDA 3408 Series V-Groove Pulley
Recommended print settings: PLA or PETG, 0.2mm layer height, minimum 3 shells (perimeters), and 30-35% infill.