1 / 6
Pirate treasure chest — print-in-place hinged trinket box, two colour — image 1
1 / 6

Pirate treasure chest — print-in-place hinged trinket box, two colour

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A 100 mm barrel-top pirate chest that comes off the bed as one working unit.

Rating
0 / 5
Likes
4
Downloads
43
Makes
0
Views
195
Reviews
0

Updated at source:

Model information

Category
Organizers
License
Creative Commons — Attribution

A barrel-top pirate treasure chest, 100 x 52 x 52 mm, that comes off the print bed as one working unit. The piano hinge prints in place — no assembly, no pin to fit, no glue, no screws.

Inside is roughly 94 x 46 x 31 mm of usable space. Dice, rings, guitar picks, a small gift.

Print The Hinge Coupon First

hinge_coupon.stl is a 3-knuckle slice of the same joint at the same clearances, about 15 minutes in one filament. It should come off the bed already pivoting. If it comes off fused, lower your first-layer flow before committing to the 3-hour chest. That test costs a quarter of an hour and has saved several full prints.

Two Colour

Import pirate_chest_combined.stl, right-click, Split to Parts. Assign a wood filament to the wood part and a dark grey or bronze to the iron part. The two solids are coordinate-locked, so nothing needs aligning.

wood.stl and iron.stl are those same two halves shipped separately, for any slicer that would rather not split a multi-solid file. Select both in one Import dialog and answer Yes to "load these files as a single object with multiple parts" — same origin, so they land already registered.

The hinge deliberately belongs to the iron part. Wood-fill PLA is brittle and the hinge is the one place this design takes load, so it prints in the tougher filament. Real chests have iron hinges anyway.

Single colour works too — print the same file as-is, the geometry is identical.

Printing

Do not rotate it. The chest sits on its base with the lid printing OPEN, leaning back just past vertical, which puts the barrel dome and its straps on a near-vertical wall. No supports, no brim.

0.2 mm layers, 3 walls, 10 to 15 percent infill. Free the lid gently on the first open — the knuckles come out jointed but snug.

Tags