1 / 2
Dual Vertical Laptop Stand — Home Server / Homelab Shelf Rack (No Supports, Parametric) — image 1
1 / 2

Dual Vertical Laptop Stand — Home Server / Homelab Shelf Rack (No Supports, Parametric)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Holds two laptops upright with 45mm airflow between them. No supports, no screws. Parametric OpenSCAD included.

Rating
0 / 5
Likes
3
Downloads
9
Makes
1
Views
133
Reviews
0

Updated at source:

Model information

Category
Computers
License
Creative Commons — Attribution

Two laptops standing upright on a shelf, with room to breathe.

I built this to hold two old laptops I use as home servers. Most vertical laptop stands are designed to store a closed laptop, not to hold one that is switched on 24/7 — so they leave the machines touching each other, sitting flat on the shelf, and breathing their own hot air. This one is built around the cooling instead.

Why this one

  • 45 mm of free air between the two laptops. Not a 15 mm divider — an actual gap.

  • The laptop sits 25 mm above the shelf, so the intake grille on the bottom panel does not sit in the dust that settles on the shelf.

  • Only two 9 mm ribs touch the machine. Both faces of the case stay fully exposed. No closed sides, no lid: convection rises freely.

  • One single piece. No screws, no heat-set inserts, no assembly.

  • Prints without any supports. Every overhang is above 45°: the lightening hole has a 60° gabled roof instead of a flat ceiling, and the buttresses only ever get narrower as they go up.

Fits your laptop

The slot is 3 mm wider than the laptop it is made for. Files included for 20, 25, 27, 30 and 35 mm thick laptops — measure yours closed, with a caliper, and pick the nearest size up.

If none of them fit, the OpenSCAD source is included and every dimension is a parameter: laptop thickness, air gap, base depth, rib height, slot depth. Change one number and export.

Print settings

  • No supports. No brim needed. Print it as it comes out of the file.

  • 0.3 mm layers, 0.6 mm line width, 3 walls, 10-15% infill.

  • PLA is fine. ~126 g and ~5-6 h for the 27 mm version.

  • Any material works; this is not a structural part under load, but do not drop the infill to zero — the buttresses do real work.

Mounting tip that matters more than the stand

Put the laptops in with the hinge facing UP. Almost all laptops exhaust hot air at the back, next to the hinge. Hinge up means the hot air leaves upwards instead of being trapped at the bottom of the slot.

Stick felt pads in the bottom of the slots.

Dimensions (27 mm version)

  • Footprint: 153 x 170 mm

  • Height: 107 mm

  • Slot: 30 mm wide, 50 mm deep

  • Air gap between laptops: 45 mm

Inspired by Dual Laptop Vertical Stand by mm0070, redesigned from scratch in OpenSCAD.

Diseñado en OpenSCAD. El archivo .scad está incluido y todo es paramétrico: grosor del portátil, hueco de aire, profundidad de la base y altura de las costillas. Si tus portátiles no encajan en ninguna de las medidas incluidas, cambia grosor y exporta.

Tags