Car 17mm ball mount base for Subaru Forester 2019+
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is for Subaru forester 2019+. maybe ok for Subaru outback and crosstreck of some years.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 4
- Makes
- 0
- Views
- 48
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is for Subaru forester 2019+. maybe ok for Subaru outback and crosstreck of some years, check the photos to match the verical vent and the small screen.
I didn't find proper phone mount for my car for years, so I designed this and think it is good enough to share after improvements and usage for weeks. It holds on the back of the screen and the top of the screen.
Please be aware, this requires to remove vent at driver side to install.
To install:
remove the driver side vent according to this video I referred, only driver side vent, no others are needed: https://www.youtube.com/watch?v=h-gLmbfYQC8
insert a clip between the top of the monitor and dashboard cover to have a bigger slot to hold this mount base. (photo 3)
snap to the back side of the screen, there is a vertical pastic. (photo 4)
snap to the side of the screen, there is another groove. (photo 5)
insert the top piece of this mount to the screen top slot from the left side when doing step 4. (photo 6)
push the vent back in, done.
ASA is recommended, I used pc, petg may be ok. support is needed to print, brim may be needed.
Checkout my phone holder designs to work with this mount.