1 / 1
Wither King + Team-Color Bases for the Minecraft Chess Set — image 1

Wither King + Team-Color Bases for the Minecraft Chess Set

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A from-scratch Wither king and press-fit team-color bases for PotatoFi's Minecraft chess set. No supports needed.

Rating
0 / 5
Likes
6
Downloads
12
Makes
0
Views
162
Reviews
0

Updated at source:

Model information

Category
Board Games
License
Creative Commons — Attribution — Noncommercial — Share Alike

Got my ancient MK3S working again. My son loves chess and Minecraft, so I printed PotatoFi's Minecraft Chess Set for him so he can brag in Chess Club. He is loving it. Original set: https://www.thingiverse.com/thing:143991

But there were two things I wanted to fix. The original uses the same Enderman piece for both the king and the queen, with a pumpkin head swap to tell them apart. And the pieces print in mob-authentic colors with no bases, so both armies look identical and the tall guys tip over easily.

So this remix adds two things.

First, a from-scratch Wither king, about 82.5 mm plus pedestal, so it tops the Enderman queen. Voxel-built in the style of the original set: flat back, relief front, prints lying on its back with no supports, no seams, and nothing to glue together. The three faces are engraved 0.6 mm and read just fine as-is, no painting needed (see the photos).

Second, team-color bases for every piece. I printed one army's bases white and the other black for the classic chess look, and the mob colors stay authentic. Green and brown could also be interesting. Each base top has a recess matching the piece's foot voxels, so pieces press in with at most a dab of glue. Each base also has a blind magnet pocket underneath (more on that below).

You will need the original pieces! This upload is only the wither king and the bases. Print everything else from PotatoFi's set: https://www.thingiverse.com/thing:143991

What to print (per team):

wither_king.stl: 1 (this is the king piece itself)

base_wither.stl: 1 (two-tier pedestal with a glue socket for the king)

base_slime.stl: 8 (slime pawns)

base_creeper_potatofi.stl: 2 (creeper rooks, fits the original spread feet)

base_skeleton.stl: 2 (skeleton knights)

base_zombie.stl: 2 (zombie bishops)

base_enderman.stl: 1 (enderman queen)

There is also a base_creeper.stl with a plain 16x16 recess. It does NOT fit the original creeper, it is for my own remixed creeper. Make sure to print base_creeper_potatofi.stl for PotatoFi's creepers.

Everything prints in one color per part, no supports. The wither stands on a small tail stub, glue it into the pedestal socket. The stub is flush with the piece's flat back and the socket is offset to match, so it only fits one way and the faces end up on the front.

Magnets (optional): every base has a blind pocket for a round 5x2 mm magnet, pressed in from below. That is 32 magnets for both teams. This pairs really nicely with lenny528's magnetic snap-tile board, the base spacing matches its field magnets: https://makerworld.com/en/models/1738785-minecraft-chess-set-magnetic

Skip the magnets and the bases work fine on any normal board. Make sure to check polarity against your board before pressing magnets in.

Fit: the recesses have 0.15 mm clearance per side. That is a snug press fit on my MK3S. If your printer runs tight, a light scrape with a hobby knife will do the trick.

Credits: piece foot layouts and heights follow PotatoFi's set (CC BY-NC-SA) so everything stays compatible. The magnet spacing follows lenny528's magnetic board. All geometry here is modeled from scratch. Minecraft belongs to Mojang. Personal use only.

Let me know how your prints turn out! All feedback is welcome!

Tags