1 / 6
18650 charger Feiyu Tech
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
loos fit wall mount for 18650 charger from Feiyu Tech. 24 mm mounting hole distance.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 1
- Makes
- 0
- Views
- 9
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Creative Commons — Attribution — Noncommercial
The wall mount can be securely attached using two 3.5 mm countersunk screws.
I designed it specifically for my acoustic wall, with a screw spacing of 24 mm.
The through-holes are teardrop-shaped to prevent sagging during printing and reinforced with micro-features to reduce the risk of cracking when printed in the upright position.
On the right outer wall three cable clamps allow secure and tear protected mounting of the charging cable.
I used regular PLA (white) with a 0.4 mm nozzle and 2 wall layers.