Prusa Mini+ Plate Rack Stand
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A plate rack built for your Prusa MINI+. It lifts the printer and racks your build plates underneath.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 1
- Makes
- 0
- Views
- 31
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
The Prusa MINI+ uses relatively small build plates, but it's still a waste of desk space to have a separate rack for them. This stand solves that issue by slotting in underneath the printer, with risers under the printer's feet. From there it's as simple as pulling the warm plate off the printer, sliding a fresh plate out of the rack and starting your next print. When you've got the warm plate cleared off and cleaned, throw it in the plate rack stand and you're ready for the next go-round.
The parts clip together to make the stand - no supports, tools, extra hardware or MMU3 required. 3MF plates are grouped by color and ready to print. Assembly manual included.
This stand uses measurements based on Prusa's published specifications for the Mini+.
Print settings
Layer height: 0.2 mm
Walls: 2 · Top/bottom: 4
Infill: 15% gyroid
Supports: none — every part is oriented to print unsupported
Material: PLA/PETG/ASA/ABS
Filament: 340g · Print time: 9h5m