1 / 10
SKADIS keyhole hanger ( HEAVY DUTY) — image 1
1 / 10

SKADIS keyhole hanger ( HEAVY DUTY)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A keyhole hanger designed to be strong but also doesn't use a lot of filament

Rating
5 / 5
Likes
12
Downloads
17
Makes
1
Views
166
Reviews
1

Updated at source:

Model information

Category
Organizers
License
Creative Commons — Attribution — Noncommercial

HBM Organizer T-Clip Hangers

Before anything else, a big thank you to @LineArcLine for creating the amazing SKÅDIS T-Clip ecosystem! 🙌

And another shoutout to @tchoupshop_82950 for the low-profile T-Clip that I used in this design. ❤

I wanted a simple way to hang my HBM organizer/drawer cabinet on a SKÅDIS board, so I designed these hangers specifically for it.

🔗 HBM organizer:
https://www.hbm-machines.com/be-nl/p/hbm-64-laden-ladenkast-assortimentskast-opbergsysteem?sku=8695

📦 What's included?

There are 3 different designs in the files, and each design comes in 2 versions:

  • Standard version – no bolt hole

  • WH version – includes a hole for an M3×10 bolt

The M3×10 bolt is highly recommended. It significantly increases the strength of the mount and also adds a nice safety feature. If the printed part ever does crack or break under heavy load, the bolt helps keep everything together instead of letting the whole organizer come crashing down. 😅

🔧 Design 1 — HBM Mount

Made specifically for mounting the HBM drawer cabinet.

  • HBM_MOUNT

  • HBM_MOUNT_WH — with M3 bolt hole

🔧 Design 2 — Centered Mount

Same basic design as Design 1, but without the offset needed for the HBM drawer cabinet.

This puts the hook right in the center, making it useful for other applications too.

  • KEYHOLE_MOUNT_CENTERED

  • KEYHOLE_MOUNT_CENTERED_WH — with M3 bolt hole

🔧 Design 3 — Corner Mount

A more general-purpose hook design for other things.

⚠ You will need to mirror this part in your slicer depending on which side you want to mount it. (only for the corner mount)

  • KEYHOLE_MOUNT_CORNER

  • KEYHOLE_MOUNT_CORNER_WH — with M3 bolt hole

🛠 What you need

  • 🔩 A sufficient number of SKÅDIS keyhole mounts

    • 2 are required for the HBM drawer cabinet

  • 🔩 1× M3×10 bolt per mount when using the _WH version ( you have to thread your own threads using the bolt so a little resistance is to be expected )

  • 🔗 2× low-profile T-Clips, as shown at the beginning of this page

🖨 Recommended Print Settings

For the best balance between strength and print time, I recommend:

  • Infill: 40%

  • Infill pattern: Gyroid

  • Material: PETG is highly recommended, especially if you plan to hang heavier items.

💪 Extra Strength

If you want to make the hanger even stronger, I highly recommend using a modifier cylinder in your slicer.

Place the cylinder around the main load-bearing area of the hanger and set the infill inside the modifier to 100%.

This gives the critical area a solid core while keeping the rest of the print at 40% gyroid infill. You get extra strength where it actually matters without having to print the entire part at 100% infill.

For the strongest and most reliable result, my recommended combination is:

PETG + 40% Gyroid + 100% infill modifier around the load-bearing section + M3×10 bolt. 💪🔩

This is especially recommended for the HBM drawer cabinet, since the mount can be subjected to quite a bit of load.

And that's it! 🎉

I hope these are useful for anyone looking for a simple way to combine an HBM organizer with the SKÅDIS ecosystem.

If you print one, I'd love to see how you use it! 😄

Tags