1 / 3
Kobalt Toolbox Foot
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Add some TPU feet to your toolbox
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 12
- Makes
- 0
- Views
- 88
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Garage
- License
- Creative Commons — Attribution — Noncommercial
I used 95A TPU with one wall of 0.6mm width (0.4mm nozzle) and 10% gyroid infill.
You will need to turn off "ensure wall thickness". Also only use 2-3 bottom layers. Orient the part like seen in the image on the orange background.
Even with all this, they're only slightly squishy so it is more to protect your bench or table if you slide it around. If you do have foaming TPU, that could work well solid.
They're press-fit, and rely on the ability of TPU to compress, so don't use some other type of filament. Add a little piece of double sided tape to hold a bit more securely.