Mokkom 64mm Grinder Tilted Base & Grind Cup Holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Includes a tilted base to reduce retention and a portafilter fork replacement to make grinding into the cup cleaner.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 14
- Makes
- 0
- Views
- 76
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial
This is my collection of modifications for the "Mokkom" 64mm flat burr coffee grinder. It's designed to have fairly low retention out of the box, but in my experience, there's still room for improvement.
The tilted base model can accommodate six 3M SJ-5012 rubber feet and holds the grinder at a fairly aggressive 15° forwards.
The grind cup/catch cup that comes with the grinder for single-dosing can be very messy due to how far from the output chute it sits on the base. I was originally going to design a podium for a Niche grind cup, but ended up making this replacement for the portafilter fork. It screws into the same position with the original screws, and the stock cup will snap in and out and should be held securely under the chute during grinding.
I printed both in Inland Tough PC, but any reasonably durable PETG or ABS with good layer adhesion should be fine as well.