DIY Hair Electrolysis Kit
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A nice box for hair removal based on an old project found on the internet that seems to work.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 0
- Makes
- 0
- Views
- 73
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Home Medical Tools
- License
- Creative Commons — Attribution
This kit is an attempt to make a neater version of the model i found here: https://www.hairtell.com/forum/t/my-diy-electrolysis-setup/56726
I originally intended to include a 12V battery pack but I didn't have the proper charger so I opted to use a USB C voltage booster, but it could be easily included.
The probe tip was made by sharpening a 0.4 mm pin down to about 0.1 with sandpaper. In the end it should look thinner than a hair.
I basically followed the wiring instructions from the link above, except i included the pulse switch on the side of the pen instead of an external pedal. The negative terminal jack should connect to the pen jack and the positive one should be attached with an alligator clip to a sponge/cloth wet with a saline solution touching your skin. The current can be adjusted by the 100k and 10k potentiometers.
There are only a few other diy kits available of this kind of thing made by fare more skilled people, but the price is still quite prohibitive since you would most probably need to order a custom pcb, stencils and surface mount components, but if you have the resources i would strongly suggest: