1 / 1
Zyxel GS1200-8 Shelf — 10" Mini Rack (1U) — image 1

Zyxel GS1200-8 Shelf — 10" Mini Rack (1U)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A 1U shelf that mounts a Zyxel GS1200-8 8-port gigabit switch in a 10" mini rack.

Rating
0 / 5
Likes
0
Downloads
10
Makes
0
Views
44
Reviews
0

Updated at source:

Model information

Category
Electronics
License
Creative Commons — Public Domain

Fits: Zyxel GS1200-8 — 155 × 85 × 26 mm.

Print settings

Print it face down — front panel flat on the bed, tray pointing up.

This is the one thing that matters. Printed upright, the top edge of the cut-out becomes a 157 mm unsupported bridge and will sag. Face down, the panel prints as a flat slab and every wall of the tray rises perpendicular to the bed.

  • Supports: OFF — not needed in this orientation

  • Nozzle 0.4 mm, layer height 0.2 mm

  • 4 perimeters, 4 top/bottom layers

  • 20% infill

  • PETG, ASA or PLA+ (same as MOD10's own recommendation)

  • No brim required — the flat panel gives a large first layer

The rear stops are 45° wedges rather than square walls, specifically so they stay self-supporting in this print orientation.





Credits

Based on the 1U blanking plate from MOD10 — Modular 10" Server Rack by MandicReally. The panel outline, thickness, rear stiffening ribs and the four mounting slots are taken from that part so the fit is exact.

Please support the original design: https://www.printables.com/model/1225275