Nimbus porthole screen frame
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This frame is designed to hold screening when the porthole is open. Fits Nimbus T9 or other 320x110mm porthole openings
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 3
- Makes
- 0
- Views
- 41
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution
The Nimbus T9 porthole openings are 320x100mm, and this frame fits snugly into that area. The 3MF layout allows one frame to be printed within the print bed area of a Bambu X1C. I printed in Extra Draft mode and it works great. Each side of the frame comes in two pieces meant to sandwich a piece of fiberglass window screening. The track depression goes towards the interior. I position the first frame on the work surface and place the screening on top. Then I run a bead of hot glue over the screen following the track, and quickly press the top piece of the frame into place, holding until the glue cools. Trim the excess screening once the frame is assembled. There are 1mm posts to help with alignment and to hold the screening in place. These posts should also be cut off once the screen is assembled.