1 / 3
Nocturne camera mount 2020 extrusion
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Mount for LL's Nocturne camera, designed for 2020 extrusion.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 13
- Makes
- 0
- Views
- 93
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Voron Parts & Upgrades
- License
- Creative Commons — Public Domain
2020 extrusion mount for Nocturne camera. Part is designed to mount to the underside of your top extrusions in the corner. Use M2/M2.5 screws to attach camera and front cover. Screws are threaded directly into plastic, no heatset inserts required. Print without support.
Part is tested on a 250 Trident with Stealthburner. There is good clearance when toolhead is at front left corner (picture 2).
BOM:
+ 2x M3 roll-in nuts.
+ 2x SHCS M3x8 screws.
+ 4x M2/M2.5 screws of at least 15 mm length per original design by Luke's Laboratory.