Fox 34 Rhythm Full Mud Guard
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A full mudguard mount for the Fox 34 Rhythm, uses M3x12mm machine screws and 12mm velcro straps to mount.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 7
- Makes
- 0
- Views
- 99
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Other mud guards didn't itch my scratch. Wanted a full guard instead of the rear section alone. Uses the existing screw holes for the primary mount, also included slots to run 12mm wide Velcro as a secondary assurance. (I opted for the Velcro cable organizer straps that I had on hand and linked together).
File is situated at the 55 degree angle which was most conducive for my K1 Max to print with minimal supports and least waste.
I opted to use M3x12mm Allen head machine screws to mount the mudguard.
I did my best to match the curvature of the fork for surfaces to match, it's not perfect, but given I used minimal tools and basic geometry it worked out quite well.
So far I have had mine on for around 50 miles of aggressive up and downhill trails with no shortage of rocks to fling into it, so far I have had no cracking, fracturing or indentations.
Print at or around 20% infill at this angle with default tree supports of 30 degree using Orca-Slicer, took my printer about 5.5 hours
Use of "TAR" in the name is a branding thing significant to me and many of my other ventures, made this for personal uses initially but figured I'd share! Enjoy!