F.A.R. Signals Twister T8 (Old Model, do not print)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Mini Model of a fictional siren.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 0
- Makes
- 0
- Views
- 20
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Note: You can scrap/trash the arrow, it's only here because i forgot to remove it in TinkerCAD
Cover image is from Roblox and is a visual attempt at a full scale model
This mini siren may not work as the rotor may be locked in with the stator from there being like 0 clearance from my poor design choices, and I recommend that you sand the rotor down a bit to increase rotor-stator clearance and prevent friction welding
Parts required (These are just guesses by me [as i do not have a 3D printer and cannot test my own models], therefor you may find complications with the setup process, if so, please leave a comment about this):
SCREWS (If you have any 6mm screws already you may use those):
https://www.amazon.com/Yinpecly-Machine-Phillips-Stainless-Threaded/dp/B0G392RXW5/ref=sr_1_8?crid=30VGXBDDO3FD0&dib=eyJ2IjoiMSJ9.Q0WTt39ujJOBNgDkzexhPCPyAdAyjuCbwTLlT0fqbGKVy2xmiSiT-ossJk6lsvLn_5bVuGZRyuBsyjzNehHsLXRQMCF-vSrcTbrUCbK4wNXp3ropHnCDLqU9lwpc5KRgUtF98JFx7i8U-5RiEOsc1zuqF--wtIID_iFjfnxejXYT67MCrS5mC4VADoHYq5crLJnDkEvdtqIAGAMaXa7L3PZeE5km9ds6vD-Jqy0TwE-okwTQX4WgoGTK5cBuDkesw0w67PNN8Gs325307fUbq8IUPJuTbRNpQ2uTMWzRQVk.lbEmO3uDbFl9JevICpUyvRegUq8u_34h7jYqO0CriKE&dib_tag=se&keywords=6mm%2Bscrew%2B4%2Bpack&qid=1787112191&s=hi&sprefix=6mm%2Bscrew%2B4%2Bpack%2Ctools%2C119&sr=1-8&th=1
PVC Pipe pole (Optional):
(Didn't find one yet, sorry, if you find one yourself, it should be 17mm)