1 / 3
3dsets Model7 Buggy servo arm adpter
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Remix of this Model7 Buggy servo arm adapter to work better with the servo horns I purchased on Amazon
- Rating
- 0 / 5
- Likes
- 18
- Downloads
- 107
- Makes
- 0
- Views
- 542
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution
Remix of this Model7 Buggy servo arm adapter to work better with the servo horns I purchased on Amazon: https://www.amazon.com/dp/B07D56FVK5.
Changes:
- Holes for mounting the servo arm increased to 3mm
- Center hole enlarged to allow mounting the adapter between the horn and the servo to reduce the required clearance inside the the servo housing on the buggy.
- Decrease the size of the holes for mounting the steering rods so that the screws have more to bite into. They seemed a little loose on the original.
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
Rafts:
No
Supports:
No
Resolution:
0.20 mm
Infill:
20
Filament: Prusament PLA
Notes:
I increased the perimeter count to 3 to have more walls around the screw holes, not sure its required though.