HexaDry – Cutting Board Stand & Kitchen Drying Rack
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Made this for my mom's coffee corner. Lifts cutting boards off wet counters so air circulates and wood stays dry.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 5
- Makes
- 0
- Views
- 47
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial
I originally designed this simple stand for my mom's kitchen. Her wooden cutting boards sit right behind the coffee machine, where water can spill while filling up the coffe machine. Leaving wood sitting in trapped water eventually leads to warping or mold, which I wanted to fix.
This honeycomb riser lifts the board off the countertop so air can circulate underneath and keep everything dry.
Why this design works:
5 feet for stability: It has four feet on the corners and one right in the middle, so it stays solid even under heavy cutting boards without sagging.
You can use it for oil bottles, dish soap bars, or anything else you want to keep off a wet counter.
In 4 Sizes
Print info and a small warning:
Printed in PETG
No supports needed.
15 to 20 percent gyroid or cubic infill is plenty.
Important tip: Let your print bed cool down completely before removing the model. Because the print is flatand long, pulling it off a hot bed can bend or warp the frame.