Bren2 Brace Adapter
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution
Bren2 Brace Adapter
Brace adapter that uses factory hinge components to enable use of AR-style brace.
Different versions for either 3x 123 batteries + 2032 coin batteries, 1x 123 battery + 2032 coins, or solid for no batteries.
50% infill and 4x walls results in a brace I cannot break with my hands. Print orientations as-published are best. I used normal supports/everywhere. Tree supports led to a great deal of cleanup so I recommend Normal supports instead.
Endcap available in either twist-off or hinged models. The hinged model needs a small pin for the hinge. Endcaps have provision for an o-ring if desired.
Overall LOP is 12.5" if using a standard brace. The brace in the pics is still in development. The brace needs to be narrow enough on the sides to allow the hinge's lock to engage in the fully folded closed position, as the brace in the pics show.
Print Settings
Printer Brand:
Creality
Printer:
CR-10
Rafts:
Doesn't Matter
Supports:
Yes
Resolution:
0.1
Infill:
50-100%
Filament: eSun PLA+ Black
Notes:
Brace adapter that uses factory hinge components to enable use of AR-style brace.
Different versions for either 3x 123 batteries + 2032 coin batteries, 1x 123 battery + 2032 coins, or solid for no batteries.50% infill and 4x walls results in a brace I cannot break with my hands.
Endcap available in either twist-off or hinged models. The hinged model needs a small pin for the hinge. Endcaps have provision for an o-ring if desired.
Overall LOP is 12.5" if using a standard brace. The brace in the pics is still in development. The brace needs to be narrow enough on the sides to allow the hinge's lock to engage in the fully folded closed position, as the brace in the pics show.
Category: DIY