Triple Buzz Bar for "Crocodile" Rods (DIY Pod Adapter)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a lightweight and durable 3D-printable 3-rod buzz bar (rod pod adapter).
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 2
- Makes
- 0
- Views
- 19
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a lightweight and durable 3D-printable 3-rod buzz bar (rod pod adapter). It is specially designed to convert a standard single bankstick/rod holder into a full-featured rod pod for 3 fishing rods.
The model geometry is optimized for heavy fiberglass rods like the popular "Crocodile 240" and medium-sized spinning reels (up to 5000 size, e.g., Kaida Rezel 5000). The spacing between the slots is perfectly calculated so the reels do not touch or interfere with each other during action. Parameters of mount hole : depth = 10 mm and diameter = 8 mm/.
Features:
Rod Spacing: ~200mm (ideal for 4000-6000 size reels).
Safe Design: Smooth round fillets at the bottom of the slots prevent plastic cracking under high stress.
Fast Print: Optimized to be printed with low infill without losing structural integrity.
Print Settings (Recommended):
Material: PETG, ABS, or ASA (highly recommended for outdoor and UV resistance. Avoid PLA as it melts in direct sunlight).
Orientation: Print flat on the bed for maximum structural strength along the layers.
Perimeters/Walls: 4–5 lines (crucial for toughness).
Infill: 20% (use Gyroid or Cubic pattern for internal strength).
Layer Height: 0.24mm – 0.28mm for faster printing.
Top/Bottom Layers: 5–6 layers.