Cute Sticky Fly Card Holders for Plant Pots
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Flower, cat and frog holders that make yellow sticky fly cards look like decor in your houseplants.
- Rating
- 5 / 5
- Likes
- 5
- Downloads
- 4
- Makes
- 1
- Views
- 29
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Yellow sticky fly cards work, but they look awful stuck in a houseplant. These three holders turn them into something you do not mind seeing on the shelf.
WHAT YOU GET
• Saksi_Karti_Tutucu_Cicek.stl -- flower design
• Saksi_Karti_Tutucu_Kedi.stl -- cat design
• Saksi_Karti_Tutucu_Kurbaga.stl -- frog design
• 00_Uclu_Baski_Tablasi.stl -- all three on one plate
KEY DIMENSIONS (mm)
• Overall height: approx. 140
• Card slot: 1.2 wide
• Stake thickness: 2.4
PRINT SETTINGS
• PLA or PETG, 0.20 mm layers
• Print flat side down, no supports needed
• If your cards are thicker, scale 5% in Z only in your slicer
ASSEMBLY
Slide the bottom edge of the sticky card into the slot between the front shoe and the back plate, then push the pointed stake into the pot soil.
Every dimension is in millimetres. Tolerances on friction fits are 0.20-0.35 mm, which suits most FDM printers, but printers and filaments vary - print one part first and check the fit before you print a batch.
License: Creative Commons Attribution-NonCommercial-ShareAlike 4.0 (CC BY-NC-SA 4.0). Print it, remix it, share it - just credit the design and do not sell the printed parts or the files.