1 / 1
Heavy-Duty Beach Towel Clip with Writable Name Tag — image 1

Heavy-Duty Beach Towel Clip with Writable Name Tag

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A strong C-clip that pins a towel to a sun lounger in wind, with a panel you can write your name on.

Rating
0 / 5
Likes
1
Downloads
2
Makes
0
Views
23
Reviews
0

Updated at source:

Model information

Category
Summer
License
Creative Commons — Attribution — Noncommercial — Share Alike

A strong C-clip that pins your towel to a sun lounger in wind, with a flat panel on the side so nobody walks off with the wrong towel.

WHAT YOU GET

• Isimlikli_Guclu_Havlu_Sezlong_Klipsi.stl -- single-piece clip

KEY DIMENSIONS (mm)

• Overall: 90 x 50 x 32.4

• Jaw opening: 27

• Name plate area: 52 x 14

PRINT SETTINGS

• PETG, ASA or nylon. PLA will deform in a hot car or in direct sun

• Print on the wide side face

• 0.24 mm layers, 5-6 walls, 35% gyroid infill, no supports

ASSEMBLY

Wrap the towel over the edge of the lounger and press the open C mouth down over both. Write on the name panel with a permanent marker, or emboss a name in your slicer before printing.

Every dimension is in millimetres. Tolerances on friction fits are 0.20-0.35 mm, which suits most FDM printers, but printers and filaments vary - print one part first and check the fit before you print a batch.

License: Creative Commons Attribution-NonCommercial-ShareAlike 4.0 (CC BY-NC-SA 4.0). Print it, remix it, share it - just credit the design and do not sell the printed parts or the files.

Tags