1 / 1
Sunscreen Holder for Loungers and Parasols — image 1

Sunscreen Holder for Loungers and Parasols

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Keeps the sunscreen off the sand, with clips for a 25 mm lounger frame or a 30 mm parasol pole.

Rating
0 / 5
Likes
2
Downloads
0
Makes
0
Views
15
Reviews
0

Updated at source:

Model information

Category
Summer
License
Creative Commons — Attribution — Noncommercial — Share Alike

A basket that keeps the sunscreen bottle off the sand, with two clip sizes so it fits a 25 mm lounger frame or a 30 mm parasol pole.

WHAT YOU GET

• 01_Gunes_Kremi_Sepeti.stl -- bottle basket

• 02_Semsiye_Diregi_30mm_Klips.stl -- 30 mm pole clip

• 03_Sezlong_25mm_Klips.stl -- 25 mm lounger clip

• 00_Tum_Parcalar_Baski_Tablasi.stl -- all parts on one plate

KEY DIMENSIONS (mm)

• Bottle bore: 62 dia

• Basket height: 90

• Clips: 25.6 and 30.6 inner diameter

PRINT SETTINGS

• PETG or ASA, 0.24 mm layers, 4 walls

• Basket on its base, clips on the ring face

ASSEMBLY

Press the C clip of the right diameter onto the tube. Insert the mushroom-head pin into the wide hole on the back of the basket and slide it down to lock. Bottles up to 62 mm across will fit.

Every dimension is in millimetres. Tolerances on friction fits are 0.20-0.35 mm, which suits most FDM printers, but printers and filaments vary - print one part first and check the fit before you print a batch.

License: Creative Commons Attribution-NonCommercial-ShareAlike 4.0 (CC BY-NC-SA 4.0). Print it, remix it, share it - just credit the design and do not sell the printed parts or the files.

Tags