Flush-Fit CF Card Storage Box
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A flush-fit, 3D-printable case that holds 5 CompactFlash cards.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 2
- Makes
- 0
- Views
- 18
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial
The Ultimate Flush-Fit CompactFlash Case
Keep your CF storage organized and fully protected. Designed specifically with retro PC builders in mind, this case is perfect for storing industrial CF cards used with StarTech CF-to-IDE adapters (or similar), or just standard camera memory.
This model was engineered from the ground up for a premium, tactile feel without relying on external latches or fragile printed hinges. I designed this to have a perfectly clean, sleek exterior while remaining firmly locked when closed.
Key Features:
Filament Hinge System: Uses a standard piece of raw 1.75mm PLA filament as the hinge pin for a heavy-duty, zero-wobble pivot.
Stepped Overlap Lip: The lid features an internal skirt that wraps perfectly over the base, providing massive rigidity and a perfectly flush exterior shell.
Integrated Friction Snap: A concealed front locking bump provides a satisfying, secure "click."
ProTip for use: Because of this firm front lock, it is best to open the box by gripping the lid on its left and right sides rather than pulling directly from the front.
Perfect Standoff Height: The internal slots are precisely 33mm deep, leaving exactly 3.5mm of the CF card exposed so you can easily pinch and remove them.