barefoot mules

website: https://www.riverfamily.art/

Use flexible filament (TPU)

rosa settings

Prusa Slicer:

- layer height: 0.2mm
- perimeters: 0
- solid layers top: 0
- solid layers bottom: 0
- ensure vertical 
- fill density: 62%
- fill pattern: grid
- length of the infill anchor: 1000 (unlimited)
- maximum length of the infill anchor: 1000 (unlimited)
- supports: no
- speed: 18mm/s
- infill extrusion width: 0.6mm
- fan: off

Bambu Studio / Orca Slicer :

Global

0.4 nozzle

layer height: 0.2mm
line width sparse infill: 0.6mm
wall loops: 0
top shell layers: 0
bottom shell layers: 0
sparse infill density: 62%
Infill pattern: Grid
Infill anchor: 1000 (unlimited)
Max infill anchor: 1000 (unlimited)
Infill direction: 45°
Detect narrow internal solid infill: no
Speed sparse infill: 18 mm/s
Enable support: no
Reduce infill retraction: no
Cube modifier (256x256x1.1mm around height 1.5mm to make a 3 layers platform):

Infill density: 60%
Infill pattern: Rectilinear
Infill direction: 0°
Filament:

Retraction: 1.8mm
Wipe: no
Z hop: 1.2mm, Normal type
Max volumetric speed: 4.8 mm^3/s

iris settings

Bambu Studio / Orca Slicer:

Overlap 2 identical models, same settings except infill line direction: a "grid" pattern is made by overlapping 2 perpendicular zigzag patterns.

0.6 nozzle

Global

layer height: 0.28mm
line width sparse infill: 0.72mm
wall loops: 0
top shell layers: 0
bottom shell layers: 0
sparse infill density: 19%
Infill pattern: zigzag (rectilinear for Orca Slicer)
Infill anchor: 1000 (unlimited)
Max infill anchor: 1000 (unlimited)
Infill direction: 45° (model 1) - 135° (model 2)
Detect narrow internal solid infill: no
Speed sparse infill: 18 mm/s
Enable support: no
Reduce infill retraction: no
Cube modifier (256x256x1.1mm around height 1.5mm to make a 3 layers platform):

Infill density: 80% (model 1) - 0% (model 2)
Infill pattern: Rectilinear
Infill direction: 0°
Filament:

Retraction: 2.4mm
Wipe: no
Z hop: 1.2mm, Normal type
Max volumetric speed: 4.8 mm^3/s

lily settings

Bambu Studio / Orca Slicer:

Overlap 2 identical models, same settings except infill line direction: a "grid" pattern is made by overlapping 2 perpendicular zigzag patterns.

Global

layer height: 0.28mm
line width sparse infill: 1mm
wall loops: 0
top shell layers: 0
bottom shell layers: 0
sparse infill density: 14%
Infill pattern: zigzag (rectilinear for Orca Slicer)
Infill anchor: 1000 (unlimited)
Max infill anchor: 1000 (unlimited)
Infill direction: 45° (model 1) - 135° (model 2)
Detect narrow internal solid infill: no
Speed sparse infill: 18 mm/s
Enable support: no
Reduce infill retraction: no
Cube modifier (256x256x1.1mm around height 1.5mm to make a 3 layers platform):

Infill density: 60% (model 1) - 0% (model 2)
Infill pattern: Rectilinear
Infill direction: 0°
Filament:

Retraction: 2.4mm
Wipe: no
Z hop: 1.2mm, Normal type
Max volumetric speed: 4.8 mm^3/s

lys settings

Bambu Studio / Orca Slicer settings:

0.4 nozzle

global:

layer height: 0.24mm
line width walls: 0.6mm
wall generator: Arachne
order of walls: outer/inner
wall loops: 2
top shell layers: 0
bottom shell layers: 0
infill density: 0%
infill/wall overlap: 100%

lys_1:

object flow ratio: 1.2

lys_2:

infill density: 60%
infill pattern: Rectilinear
infill direction: 0°

lys_3:

infill density: 60%
infill pattern: Grid
infill direction: 45°