Component Box Booklet - with living hinge
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A printable component storage box booklet. The box is cloned from EEEEE's resistor kits.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 3
- Makes
- 0
- Views
- 37
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution
This model is a clone of the EEEEE storage booklets they provide with their resistor and capacitor kits. I quite liked the way the booklets looked but was unable to find where to purchase them separately so I cloned them for 3d printing.
The basic size has 10 containers but I added the STEP files for a single lid and base so you can easily create other size booklets.
I have tried PETG and PLA, both work but it seems that the transparent PLA I use has a tendency to break more quickly at the hinge than my black PLA. I would encourage you to try different filaments and materials to see what works best for you.
This print does need supports to print well, I recommend organic supports but make sure to not allow support on the overhang of the lid. I added a screenshot of where to put support blockers. Most printers can easily bridge a gap this small and adding supports there makes it very difficult for them to get removed without damaging the lid.
Assembly is pretty straight forward, just push the edge of the lid into the base until its flat, if the base does not retain the lid, fixate it with a couple of drops of superglue.