Die drei !!! Detektiv-Lupe — Anhänger zum Selbst-Zusammensetzen
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Detective magnifier pendant. 3 press-fit exclamation marks kids earn, name panel, lanyard loop. No supports.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 1
- Makes
- 0
- Views
- 15
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Toys & Games
- License
- Creative Commons — Public Domain
A magnifying-glass pendant where kids earn the three exclamation marks one at a time.
Designed as a giveaway for a detective-themed 7th birthday. Each child starts with an empty magnifier and earns one "!" per solved case — three stations, three marks. At the end they've assembled the full logo and take home a badge they actually earned. Bar and dot press-fit separately, so there are six pieces to earn per badge if you want six stations.
What you get
lupe_base.stl— the magnifier body with lanyard loop and recessed name panelbang_bar.stl— the tapered exclamation bar (print 3× per badge)bang_dot.stl— the dot (print 3× per badge)
Details
71 × 105 × 4 mm, prints flat with no supports
Press-fit inserts, 0.2 mm clearance — dial it in with one test print before batching
48.5 × 13 mm recessed name panel, follows the handle curve — fits names up to 10 characters. Add the name in your slicer's text tool; no need to remodel
6 mm lanyard hole. The loop sits at 73.2°, not top-centre — that's deliberate, it's directly above the centre of mass so the marks hang upright instead of tilted
~11 cm³ per body (about 13 g), inserts under 0.5 g each
Printing
Body face-up, 0.2 mm layers. Print the small parts with a brim — the 5.4 mm dots like to pop off the plate. Print a few spares; they cost nothing and they're easy to lose. Multicolour needs no AMS: just run one plate per colour and swap the spool.