Signal cable junction box (for Wago 211-2411 connectors)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A minimalist box to connect two 4 wire signal cables.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 6
- Makes
- 0
- Views
- 62
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
A few days ago, we had to splice a 4-core signal cable above a suspended ceiling, with the added constraint that the splice had to fit through a 42 mm cutout for a recessed spotlight.
We could have done it the lazy way and left the splice without an enclosure, but that is not how we work. So this minimalist box was born.
Its dimensions were optimized so that one pair of Wago 221-2411 connectors fits neatly inside the closed box, stacked on top of each other. The 1 mm deep groove on both the top and bottom helps keep a cable tie in place, so the box can be securely fastened shut.
Lately, we have seen too many models across multiple platforms that look suspiciously similar to our designs, without so much as a thank you or even a source credit. Unfortunately, that has taken away our motivation to keep sharing the original Fusion 360 source files.