CR-10 / Ender 3 Direct Drivinator (Bantam Feeder)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The bantam feeder is taller, so the tube went into the hotend at an angle. This should make it go pretty straight in,…
- Rating
- 4.6 / 5
- Likes
- 10
- Downloads
- 91
- Makes
- 7
- Views
- 554
- Reviews
- 5
Updated at source:
Model information
- Source
- Printables
- Category
- Creality Parts & Upgrades
- License
- Creative Commons — Attribution
The bantam feeder is taller, so the tube went into the hotend at an angle. This should make it go pretty straight in, plus it's got more wiggleroom in terms of tube length. I found it was pretty frustrating to have the mount be just too long/short constantly.
I would suggest printing it in the orientation that it shows up in your slicer, with supports (only touching build plate). And of course press the metal spacers for the wheels into the two big holes, they shouldn't be loose. Make sure they're level with the mount, so the wheels aren't skewed. Some more detailed information is on the original design by Madau3D.
Category: 3D Printer Parts