Nederlandse Spoorwegen Locomotor #362 - SIK - Spoor 1 / 1:32
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Nederlandse Spoorwegen Locomotor #362 - Serie 200-300 - SIK - Spoor 1 / 1:32
- Rating
- 5 / 5
- Likes
- 65
- Downloads
- 1,074
- Makes
- 4
- Views
- 4,475
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Vehicles
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
After finalizing the DB KÖF-II locomotive succesfully (https://www.printables.com/model/181942-db-kof-ii-gauge-1-132-45-mm), I challenged myself to design the Dutch alternative to this German shunter.
This is the series 200-300 of the Nederlandse Spoorwegen, nicknamed "SIK".
(https://nl.wikipedia.org/wiki/Sik_(locomotor)#Serie_201-369)
Locomotor#362 is preserved. It's in the collection of NSM (Dutch Railway Museum), still with the crane fitted. https://www.spoorwegmuseum.nl/ontdek/de-collectie/onze-treinen/ns362-sik/
The initial drive-unit is published separately: https://www.printables.com/model/181867-motor-unit-for-nederlandse-spoorwegen-locomotor-36
Under the engine cover and in the cabin you have plenty of space to mount an RC receiver, sound-module, battery, ESC-module, etc.....
The chimney is constructed by glueing a piece of 8 mm brass or steel pipe in the engine cover. (height over engine cover: 13 mm) Added a 3D model of the chimney, just in case you insist to print it anyway. (25AUG2025)
The roof is a simple lid/cover on the cabin. 4 mm magnets can be glued in the corners.
The foot- and hand-levers are glued to the frame using 1.75 filament. A piece of metal wire is fitted as a handle in the top of the hand-levers.
If you want to create this model in the old green, black and red livery, the provided number- and factory sign are to be glued to the cabin. The numbers were simply painted on for the more recent yellow and grey locomotives.
The front- and rear holders for the "end of train" signs are probably too fragile to last a reasonable time. I've never printed and fitted them.
The body is screwed to the frame by M3 screws. The buffers are glued to the frame aligned by 4 mm rod/thread. The mounted brake tubes and couplings are standard items by Marklin or Hubner. In the buffer beam 1.5 mm holes are provided to create shunting hand-grabs using some metal wire.
I used available fixtures (M2 thread) and brass wire to create hand rails.
Springs from a ball point pen are used to create sprung buffers. They are attached with M2 screws.
Good luck printing this lovely, typically Dutch locomotive!
Print Settings
Printer Brand:
Creality
Printer:
K1C
Bim:
Yes, 5 mm outside, 0.0 mm distance
Supports:
Yes
Resolution:
0.1 mm
Infill:
15%
Filament: ASA