1 / 2
Deutsche Bundesbahn "Umbauwagen" BD4yg, AB4yg & B4yg - Gauge 1 (1:32) — image 1
1 / 2

Deutsche Bundesbahn "Umbauwagen" BD4yg, AB4yg & B4yg - Gauge 1 (1:32)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Deutsche Bundesbahn "Umbauwagen" BD4yg, AB4yg & B4yg - Gauge 1 (1:32)

Rating
0 / 5
Likes
24
Downloads
463
Makes
0
Views
1,663
Reviews
0

Updated at source:

Model information

Category
Vehicles
License
Creative Commons — Attribution — Noncommercial — Share Alike

The Deutsche Bundesbahn commissioned 3 types of 4 axle Umbauwagen. https://de.wikipedia.org/wiki/Umbau-Wagen_(DB)

I have setup a modular design of half carriages. This makes it easy to create the other types of 4 axles Umbauwagens.

Using this approach results in parts that are small enough to be printed on the 300 x 300 mm bed of a Creality CR-10 printer. There aren't a lot of printers around with the build space for complete carriages.

  • The BD4yg consists of a second class half carriage and a luggage compartment.
  • Combining 2 second class sections makes a B4yg.
  • An AB4yg is a combination of a first class and a second class section.

 

  • The interiors are converted from HO scale: https://www.thingiverse.com/thing:2799058.
  • Holes are provided for screwing the walls and floors to 10x10 mm brass angle profiles with M2 screws.
  • Connect the roof to the floor with M4 threaded rods.
  • My Minden Deutsch Leicht bogies will fit.

 

 

Important note: This project will not be updated/improved/modified.

 

Print Settings

Printer:

Creality CR10

Rafts: 

Doesn't Matter

Supports:

Yes

Resolution: 

0.1 mm

Infill:

22%

Filament:

12-3D Print PLA

Green/Black


 

Notes:

 

When the modell is exposes to direct sunlight, the PLA can deform due to the heat. A better filament might be needed to avoid this.(PETG, HIPS, Etc.)

Post-Printing =============

All parts are glued with cyano-acrylate (super-glue). Some brass angle profiles are glued is for stability and to attach the coach to the chassis with some M2 bolts.

Please contact me for more detailed assembly instructions.

How I Designed This

Designed using TinkerCad. It's basically a collection of simple shapes.

I'm aware this design is not 100% accurate. I didn't count all the rivets and bolts. Some of the smaller, insignificant details, are excluded from the design

It was always my intention to create a design that shows the essential features of these carriages.

 

Tags