1 / 5
Geneva driver fidget spinner — image 1
1 / 5

Geneva driver fidget spinner

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

3-pointed geared fidget spinner consisting of 3 Maltese crosses, instead of normal gears.

Rating
0 / 5
Likes
4
Downloads
10
Makes
0
Views
53
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

This fun little gear fidget spinner will spin almost as well as a normal one, but with a twist. Instead of normal gears, it has Maltese cross gears that collide with stationary pins in the middle and make a 90° turn every time, which is an interesting motion.

Material: 

I only tried it with PLA; for me, it worked well.

It uses no non-printed parts, so it is completely printable (no bearings are used; it may not spin very well because of friction and the motion of the Maltese crosses).

Assembly:

First place the knob.

After that, press the short axle in the knob.

Then the lower cage with the extruded pins.

Insert the short axle in the middle part with the 3 stationary pins.

Place all 3 Maltese crosses in the pins of the lower cage.

Fixate the Maltese crosses using the upper cage with the holes.

Push the longer axle through the upper cage in the middle part.

And finally put the second knob on the axle.

Congratulations, your Maltese spinner is complete! Hope you like it!

Optionally, you can drip some oil on the axis of the moving parts to make it smoother. And glue both the cages together for a stronger bond.

Tags